QAÏTO 50 Brûleur à pellets pour INSERTS ou POELES A BOIS recevant des bûches de 60 à 70 cm

QAÏTO 50 for  VERY large fireplace inserts or woodstoves

FEATURES

Height of CAST IRON burner : 106 mm
Inside / outside width of the burner : 223 mm / 253 mm
Inside / outside length of the burner : 510 mm / 530 mm
Width of STAINLESS STEEL plate: 300 mm
Length of STAINLESS STEEL plate: 540 mm
Height of installed product : 122 mm

Net weight of the QAÏTO Q30 : 12.30 kg  (27 lbs)

Capacity : 7 - 7.5 kg de pellets      Power generated by 7.5 kg of pellets : 34.5 kW (Please note: this is not the efficiency. The QAÏTO's efficiency depends on each installation)

Use of your QAITO pellet burner

Fill in your QAITO with pellets, then light up the pellets with a pellet starter. In less than 5 minutes, you will get a generous and cheerful fire which will burn during approx. 1h30  (*) and will warm you up even longer thanks to the calories accumulated by the cast iron burner.  If you wish to start a new fire (**), add some more pellets in your QAITO on approx. 4/5 th of its surface : the remaining burning ashes will light up the pellets.

And QAITO is ready for a new start !!

  Approx. cost of one fire : less than 2.40 €  (price calculated with a 15 kg pellet bag at 4.80 €/u)

BENEFITS of your QAÏTO

• Safety when starting the fire
• Environmental friendly and cost efficient : 5 kg pellets/ hour, for a rather reasonable cost (~ 1.60 cts per pellet load)
  • (Reminder: you have to reload on 4/5 of the SURFACE, that is to say leave a small part of the burner without pellets so that the fresh air revives the embers and rekindles the pellets. You can however reload up to the top of the burner height).
• The glass and the fireplace remain much cleaner than with wood
• Fast elevation of temperature
• Set up of fire 3 times quicker than with wood logs
• Can be installed in almost all fireplace inserts or woodstoves (***) without fireplace modification. No need of electricty. 

(*) Each fireplace installation, each house, each weather conditions or use of a fireplace being specific, the manufacturer cannot commit himself with a precise duration of pellet combustion.

(**) Consider more or less 1 pellet reload per 75 mn.

(***) The air supplied to the fireplace - primary air - must come from the floor grille at the bottom of the insert or wood stove.